平流式气浮机调试中的注意事项：

      1 首先是我们对于设备的安装基础的设计中存在着一些的漏洞，幸好及时的发现，与客户及时做出了调整。没有带来损失，结论是虽然平流式与涡凹气浮机非常的相似，但是还是存在着一定的差别。

      2 还有是设备的二氧化氯发生器的配置，我们在原有的基础上还是配置偏小，产生的气泡不能够达到客户的污水使用要求，公司自主生产的发生器满足的使用要求，还是自己设计的令人放心。

      3 再是在设备的调试中还出现了这样的问题是，前期的气泵没有配备逆流阀，造成设备的使用中污水的逆流。

      还出现了这样的问题是所有的设备安装完毕，开始调试出现了这样的小问题，那是设备的调试中没有使用絮凝剂，从这一点能够看出，任何的简单问题，疏忽都是有可能的，通过这篇文章能够对气浮设备的使用厂家有所帮助。更多气浮机资讯请访问www.wxwoma.com

Matters needing attention in the streaming air flotation machine debugging:

1 first are our foundation for the installation of the equipment in the design that there are some loopholes, fortunately found in a timely manner, with the customer in a timely manner. Without damage, the conclusion is that although the flow and vortex concave air flotation machine is very similar, but there is a certain difference.

2 as well as equipment configuration of chlorine dioxide generator, we are still small configuration on the basis of the original, is not up to the bubble water requirements of the customers, the company independent production of the generator to satisfy the use requirement, or your own design of reassuring.

3 and in the debugging of equipment also appeared such problems is that of pump is not equipped with reflux valve, due to the use of the equipment in the sewage flow.

Finally there is the problem is all the equipment installed, start debugging there is such a small problem, it is no use flocculants in equipment debugging, from this point will be able to see, any simple question, it is possible to neglect, through this article can help in the use of air floatation machine equipment manufacturers. Air flotation machine in more information please visit www.wxwoma.com